Home > News > Content

News Categories

Enterprise Bulletin

Filling Machine Instructions For Use
Oct 10, 2017

If the filling machine is a small type of product, it can be divided into liquid filling machine, paste filling machine, powder filling machine and grain filling machine. The automation of production is divided into semi-automatic filling machine and automatic filling production line. Recently with the QS certification of food, the manufacturer of edible oil has begun to pay attention to product quality and packaging, so oil filling machine has a high status in the filling machine.

The working process

Processes of liquid filling machine is commonly: boxes piled up with empty bottle on the tray, the conveyor belt to unload tray machine, remove the tray one by one, the box with the conveyor belt to discharge machine, remove empty bottles from the box, empty the conveyor belt to the washing machine, the clean, and then transported to packing machine, so that the beverage containing bottles into one. The empty bottle taken from the unloader is carried by another conveyor belt to disinfect and clean the bottle. After inspection by the bottle, it meets the cleaning standard and then enters the filling machine and capping machine. The drink is bottled by a filling machine. The bottle with a good drink is sealed and sent to the label machine by the sealing machine. After the label is attached, the bottle is sent to the container and sent to the warehouse on the tray.

Instructions for use

Use, maintenance and installation

1. Since the filling machine is an automatic machine, the size of easy pull bottle, bottle pad and bottle cap should be uniform.

2. Before driving, you must turn the machine with a shake handle to see if it has any abnormality. It is true that you can drive again.

3. When adjusting the machine, the tool should be used properly. It is strictly forbidden to use too large tools or too hard to disarm parts so as to avoid damage to machine parts or influence machine performance.

4. Whenever the machine is adjusted, make sure to tighten the loose screw, and turn the machine to see if it meets the requirements and then drive.

5. The machine must be kept clean. It is forbidden to have oil, liquid or glass crumbs on the machine, so as to avoid damage to the machine, so it must be:

In the production process, the machine can remove the liquid or glass debris in time.

The surface of the machine should be cleaned once before and in each activity department with clean lubricating oil.

It should be cleaned once a week, especially in areas where it is not easy to clean or clean in compressed air.

Disinfection and washing

1. Screw loose, tighten the screw, and disinfect the system for disinfection or disassembly separately.

2. Put the inlet tube into the cleaning liquid and start cleaning.

3. The 500ml model may have errors in the actual filling, before the official filling can be used.

4. The filling machine USES the needle tube, 10 type of standard 5ml or 10ml syringe, 20 type 20ml glass filling machine, 100 type 100ml glass filling device.

Installation considerations

1. After the machine is opened, check whether the random technical data is complete and whether the machine is damaged in transit in order to solve it in time.

2. Install and adjust the incoming material and the material components according to the figure in this manual.

3. Lubricate the lubricating points.

4. Turn the machine with the swing handle to check whether the machine is running in the right direction (in the face of the motor spindle is counterclockwise), and the machine must protect the grounding.

Working principle and performance

1. Working principle: the filling machine is a semi-automatic piston filling machine. The cylinder can be controlled by using the cylinder to control the flow of the material, and the filling volume can be adjusted by using the magnetic reed switch to control the stroke of the cylinder.

2, performance: this company produces the semi-automatic piston single head liquid filling machine is manufactured in our company, on the basis of filling machine series, the introduction of foreign advanced filling machine technology, and has carried on the further reform and innovation, the more simple and reasonable structure, high precision, operating more simple, is the ideal choice of the high fill your company service.

Scope of application

Scope of application: mainly used in eyedrops, open-necking, vegetable oil, lube oil, oil, flower dew, chemical liquid, daily chemical industry, coating industry.


Mobile
Online message
SUBMIT>
Contact information
ADD: No.22th Shandong Road,Qingdao,China
TEL: +86-532-80795660
FAX: +86-532-80795661
E-MAIL: sarah@bealead.com
WHATSAPP: +86 13969856723