Home > News > Content

News Categories

Enterprise Bulletin

Filling Machine Growing
Oct 12, 2017

Filling machine in the processing industry has a pivotal position, Filling Machine is a lot of food, beverages, medicine, cosmetic production and processing of one of the necessary equipment for our lives play an increasingly important role. For enterprises, the use of filling machine is not a problem, Filling Machine but in its maintenance and maintenance, but it is very few people know.

1. Install and then debug, in the debugging before carefully read the instructions, ready to use the tools.

2. Installed, brushing machine and bottle washing machine installed, the filling track, then set the bottle into the level, the tank filled with material, all electrical switches in the closed position.

3. Filling the container into the tooling box, Filling Machine connected to an external power supply, the power outlet must be a three-pin socket, and a reliable ground wire to prevent the case of electric shock, the machine power switch to ON, power indicator light.

4. Bracket support plate will be filled with filling frame, with your fingers up the top of the filling head on the positioning sleeve, positioning sleeve should be able to move up and down, Filling Machine where the filling needle exposed or retracted into no obstruction.

5. Under the bottom of the tank, the switch is set to the open position so that the material can flow into the total metering pump. According to the total filling volume of each container, Filling Machine adjust the screw on the crank and rotate the knob of the filling plate to 20 degrees Left and right, then set the switch on the speed control board to open the position.

6. Filling head out of the liquid set the amount of time, the amount of liquid tightening nut tightening, cover the filling head shell, loosen the filling frame support plate.

After the use of filling machine should pay attention to its maintenance, in the maintenance of cleaning the piston and when the same time to remove the fixed screws, so as not to remove the first time in the other one of the process requirements. Before cleaning the piston filling machine, Filling Machine the remaining product should be cleaned, and then filled with soft detergent in the bucket. The cylinder has been lubricated at the factory. Please do not open or add any lubricating oil to ensure that the filling machine is clean and hygienic. In addition, while maintaining and correct the use of filling machine at the same time, but also regular testing, Filling Machine debugging. Only this kind of filling machine can be healthy and stable work.

With the continuous improvement of living standards, people for the growing demand for beverages and daily products, enterprises continue to develop, Filling Machine the beverage filling machine, brush machine and the use of more and more bottles, filling machine use Should pay attention to the problem is also increasingly sharp, therefore, for the better production of enterprises, its maintenance work is still very necessary.

Online message
Contact information
ADD: No.22th Shandong Road,Qingdao,China
TEL: +86-532-80795660
FAX: +86-532-80795661
E-MAIL: sarah@bealead.com
WHATSAPP: +86 13969856723